20LEDs Solar-powered Rechargeable PIR Motion Activated Wall Light

This solar motion wall light with 20 LEDs adopts PIR human motion induction technology and unique light controlling design. It takes the vantage of high capacity battery, water resistant, environmental friendly and long duration, which is widely applied to outdoor use such as patio, backyard, garden, balcony, deck, driveway , garage and so on.
 
Features:
AUTO WORK: it charges when the solar panel receives light and it discharges when the solar panel is in darkness automatically.
ECO-FRIENDLY& ENERGY SAVING: it is powered by sunlight, which not only charges you no money for electricity but also reduce light pollution.
PIR MOTION SENSOR& LIGHT SENSOR: at night or dark places, this solar night light will turn on automatically when people come close to the motion sensor range.
WATERPROOF BUTTON: the on/off hole is designed as an invisible switch for waterproof reason so you can use the supplied key pin to insert the on/off switch hole.
LONG DURATION: it can work more than 12 hours after direct sunlight for one day as it adopts a built-in battery with high capacity of 1200mAh.
APPLICATION SCENES: it is wifely applied to outdoor places such as backyard, garden, driveway, wall, patio, deck, gate, fence and so on.
 
Specification:
Solar panel:5.5V/0.5W/ polycrystalline silicon
Battery: 1*built-in 3.7V/1200mAh lithium battery(included)
Light source: 20*SMD2835 LED
Luminous of single LED:25LM
Luminous of the light:500LM
Light color: white(5000-5500K)
PIR motion angle: 120°
Motion distance:3-5m/10-16ft
Protection grade:IP65
Material: ABS&PS
Item color: black
Charging time:8 hours
Working time: more than 12 hours
Lifespan of the light:50000 hours
Warranty:2 year
Induction modes: light sensor/motion sensor
Item size:12.4*9.6*4.8cm/4.9*3.8*1.9in(L*W*H)
Item weight:148g/5.2oz
Package size:13*10.2*5cm/5.1*4.0*2.0in(L*W*H)
Package weight:192g/6.8oz
 
Notes:
1. Please fully charge the device before first use.
2. If there is no good sunlight in 3 months, the battery may be out of power, when it's fully charged, please use supplied key pin to unlocked the device and lighting system, otherwise, it can't work anymore.
3. If the light blinks, it means the power is low, you should charge it by sunlight soon, otherwise, the device will stop work soon.
4. If there is no good sunlight or in winter sunlight, it may take longer time to fully charge the device and this is very normal for solar products.
5. The induction lighting time extends for 30 seconds after people leave.
 
Package list:
1*Solar motion sensor light
1*Key pin
1*Expansion pillar-hinge
1*Screw
1*User manual(English）